10Litres – £75.60
ALLCOAT Wall Weatherproofing is a high performance elastomeric wall coating. It’s co-polymer emulsion compound formulation produces a technically advanced and convenient system for waterproofing a variety of internal and external surfaces.
- Excellent weather resistance
- High elasticity which is retained at low temperatures
- Non taint
- Superb adhesion
- Hard wearing
- Micro Porous – breathable
- House Walls
- Public Buildings
- Farm Buildings
- Rendered Walls
- Internal or External
Preparation & Priming
Surfaces to be coated must be clean, dry and free of any contaminants that could impair good adhesion. Ensure good drying conditions prevail throughout the application and cure of the product.
Good adhesion is obtained on all sound surfaces with adequate roughness or porosity, brickwork, clockwork, asbestos cement, concrete and cement render. For other surfaces see our data sheet.
After any necessary surface preparation apply a uniform heavy brushed coat of ALLCOAT Wall Weatherproofing liquid membrane to the surface. Leave for the recommended drying period and finish with one sprayed coat or two brushed coats.
The interval between brushed coats must allow good drying but should not exceed three days.
Recommended methods of application: Spray, Roller or Brush.
Avoid ponding on the substrate otherwise cracking will result
On porous surfaces the first coat should be thinned with water 10% maximum and allowed to cure before overcoating in the normal way. A minimum of two full coats are required for maximum durability.
Mixing: Stir container contents throughly before use.
Concrete: 4 – 6m² per litre depending on substrate a priming coat may be necessary
Clean Steel: 6 – 8m² per litre
Green, Magnolia, Mid Grey, Terracotta, White
|Pot Life @ 20°c||
10 years plus