1kg – £42.83
ALLCOAT Crack Filler is designed to easily repair, fill and seal cracks from hairline to 3mm width within concrete floors and structures.This sealant is a very low viscosity 2 component methacrylate resin and because of its composition and low surface tension it has excellent wetting power and substrate penetration. Easy installation.
Typical Uses
- Water damaged concrete (when dried)
- Warehouses
- Car parks
- Bridges / footbridges
- Pavements
- Driveways
- Sports stadiums
- Garages
- Stairways
- Prefabricated cast concrete structures
Features & Benefits
- Penetrates and protects concrete from cracks
- Seals existing cracks
- Increases compressive strength of concrete by up to 40%
- Restores colours
- Creates watertight seal – excellent for use on bridges, footbridges and car parks to prevent water ingress
- Dust repellent
- Superb protection for driveways, pathways and patios
- Simple and easy to apply
Preparatory work and installation in accordance with good flooring practices.
Easy installation, simply using a squeegee or pouring jug. The consumption depends on absorption properties of the substrate and crack depth and width.
Surface to be clean dry and free from surface contamination.
Size | 1kg |
---|---|
Viscosity | DIN 53 018 – 5 to 15 mPa |
Density | DIN 53 217 – 0.97 g/cm³ |
T-max | 20 – 40 min at 23°C |
Activator | ALLCOAT Crack Filler is pre-activated for temperatures from +0°C – +30°C |
Initiator / Hardener | ALLCOAT Hardener, depending on temperature. |
Shelf Life | Min 6 months in original containers. |
Flashpoint | MMA DIN 51 755 |
Coverage | 150 – 250 grams per m² (depending upon surface absorption) |
Colour | Clear, Grey |
There are no reviews yet, would you like to submit yours?