2.5litres – £78.22
ALLCOAT Chemical Resistant Wall Coating is a high grade, 2 pack, hard wearing polyurethane wall coating designed for maximum chemical resistance which is light fast and flexible. It is ideal where a seamless finish is required. ALLCOAT Chemical Resistant Wall Coating has good resistance to impact abrasion and trafficking. The system is resistant to high temperatures up to 150°C. Slight discolouration may occur at extreme temperatures.
Features & Benefits
- Maximum chemical resistance
- Good abrasion and impact resistance
- Easy cleaning, including removal of graffiti
- Light -fast
- Resistant to thermal shock & hot water
- Hygienic – does not support fungus or bacterial growth
- Attractive range of colours available
- Food preparation and manufacturing areas
- Chemical plants
- Aircraft hangers
- Vehicle maintenance bays
- Any areas where a long lasting, easily cleaned, high chemical resistance finish is essential
ALLCOAT Chemical Resistant Wall Coating Satin – For general usage produced as a semi gloss finish
ALLCOAT Chemical Resistant Wall Coating Matt – Matt finish grade of Chemical Resistant Wall Coating produced as a two pack product.
All surfaces to be coated with ALLCOAT Chemical Resistant Wall Coating should be clean, dry and free from oil, grease etc.
Apply onto the properly prepared surface a coat of ALLCOAT WB Primer.
Mixing & Application
Mix the base and hardener thoroughly together, ideally by slow speed mechanical mixer, scraping all loose material with a knife from the sides and base of the container to ensure a complete mix is obtained. Apply by brush, roller or spray. When dry and within a maximum period of 18 hours after drying, apply the second or subsequent coat of ALLCOAT Chemical Resistant Wall Coating. Due to the pot life of ALLCOAT Chemical Resistant Wall Coating the whole of the material has to be used when mixed within the time period.
2.5 litres, 5 litres
Light Grey, Mid Blue, Mid Green, Mid Grey, Silver, Silver Grey, Terracotta, Tile Red, White, Yellow
7-8m² per L per coat
|Dry film thickness||
75 microns at a coverage rate of 8m² per L
40 minutes at 20°C
|Tack free time||
2 hours at 20°C
|Hard film time||
6 hours at 20°C
|Full chemical resistance||
5 days at 20°C
|Application temperature limits||
+ 5° to 30°C
6 months at ambient temperature