ALLCOAT Bund Sealer

High grade, hard wearing polyurethane wall coating designed for maximum chemical resistance

Bund Sealer

Bund Sealer

2.5litres – £50.13

ALLCOAT Bund Sealer is a high grade, 2 pack, hard wearing polyurethane Bund coating designed for maximum chemical resistance which is light fast and flexible. It is ideal where a seamless finish is required. ALLCOAT Bund Sealer has good resistance to impact abrasion and trafficking. The system is resistant to high temperatures up to 150°C. Slight discolouration may occur at extreme temperatures. Up to 8m² per litre.

Features & Benefits

  • Maximum chemical resistance
  • Seamless
  • Good abrasion and impact resistance
  • Easy cleaning, including removal of graffiti
  • Light -fast
  • Resistant to thermal shock & hot water
  • Hygienic – does not support fungus or bacterial growth
  • Attractive range of colours available

Typical Uses

  • Food preparation and manufacturing areas
  • Laboratories
  • Chemical plants
  • Aircraft hangers
  • Vehicle maintenance bays
  • Abattoirs
  • Breweries
  • Mortuaries
  • Bakeries
  • Toilets
  • Any areas where a long lasting, easily cleaned, high chemical resistance finish is essential

Grades Available

ALLCOAT Bund Sealer Satin – For general usage produced as a semi gloss finish

ALLCOAT Bund Sealer Matt – Matt finish grade of Bund Sealer produced as a three pack product.

SKU: Polifloor. Categories: , .


All surfaces to be coated with ALLCOAT Bund Sealer should be clean, dry and free from oil, grease etc.


Apply onto the properly prepared surface a coat of ALLCOAT WB Primer.

Mixing & Application

Mix the base and hardener thoroughly together, ideally by slow speed mechanical mixer, scraping all loose material with a knife from the sides and base of the container to ensure a complete mix is obtained. Apply by brush, roller or spray. When dry and within a maximum period of 18 hours after drying, apply the second or subsequent coat of ALLCOAT Bund Sealer. Due to the pot life of ALLCOAT Bund Sealer the whole of the material has to be used when mixed within the time period.


2.5 litres, 5 litres


Light Grey, Mid Blue, Mid Green, Mid Grey, Terracotta, Tile Red

Solids content

Approx. 60%


Gloss, Matt

Dry film thickness

75 microns at a coverage rate of 8m² per L

Pot life

40 minutes at 20°C

Tack free time

2 hours at 20°C

Hard film time

6 hours at 20°C

Full chemical resistance

5 days at 20°C

Application temperature limits

+ 5° to 30°C

Shelf life

6 months at ambient temperature

ALLCOAT Bund Sealer TDS   ALLCOAT Bund Sealer TDS

ALLCOAT Bund Sealer Part A COSHH   ALLCOAT Bund Sealer Part A COSHH

ALLCOAT Bund Sealer Part B COSHH   ALLCOAT Bund Sealer Part B COSHH

There are no reviews yet, would you like to submit yours?

Be the first to review “Bund Sealer”


Related Products

You may also like…