ALLCOAT Swimming Pool Lining

High grade, hard wearing polyurethane swimming pool lining designed for maximum chemical resistance

Swimming Pool Lining

Polipool

5 litres – £104.00

ALLCOAT Swimming Pool Lining is a high grade, 2 pack, hard wearing polyurethane coating designed for maximum chemical resistance which is light fast and flexible. It is ideal where a seamless finish is required. ALLCOAT Swimming Pool Lining has good resistance to impact abrasion and trafficking. The system is resistant to high temperatures up to 150°C. Slight discolouration may occur at extreme temperatures.

Features & Benefits

  • Maximum chemical resistance
  • Seamless
  • Good abrasion and impact resistance
  • Easy cleaning, including removal of graffiti
  • Light -fast
  • Resistant to thermal shock & hot water
  • Hygienic – does not support fungus or bacterial growth
  • Attractive range of colours available

Typical Uses

  • Any areas where a long lasting, easily cleaned, high chemical resistance finish is essential

Grades Available

ALLCOAT Swimming Pool Lining Satin – For general usage produced as a semi gloss finish.

ALLCOAT Swimming Pool Lining Matt – Matt finish grade of Swimming Pool Lining produced as a three pack product.

SKU: Polipool Swimming Pool. Categories: , .

Preparation

All surfaces to be coated with ALLCOAT Swimming Pool Lining should be clean, dry and free from oil, grease etc.

Priming

Apply onto the properly prepared surface a coat of ALLCOAT WB Primer.

Mixing & Application

Mix the base and hardener thoroughly together, ideally by slow speed mechanical mixer, scraping all loose material with a knife from the sides and base of the container to ensure a complete mix is obtained. Apply by brush, roller or spray. When dry and within a maximum period of 18 hours after drying, apply the second or subsequent coat of ALLCOAT Swimming Pool Lining. Due to the pot life of ALLCOAT Swimming Pool Lining the whole of the material has to be used when mixed within the time period.

Size

2.5 litres, 5 litres

Colour

Light Blue, Light Grey, Mid Blue, Mid Green, Mid Grey, Terracotta, Tile Red

Solids content

Approx. 60%

Coverage

7-8m² per L per coat

Dry film thickness

75 microns at a coverage rate of 8m² per L

Pot life

40 minutes at 20°C

Tack free time

2 hours at 20°C

Hard film time

6 hours at 20°C

Full chemical resistance

5 days at 20°C

Application temperature limits

+ 5° to 30°C

Shelf life

6 months at ambient temperature

ALLCOAT Swimming Pool Lining TDS   ALLCOAT Swimming Pool Lining TDS

ALLCOAT Swimming Pool Lining Part A COSHH   ALLCOAT Swimming Pool Lining Part A COSHH

ALLCOAT Swimming Pool Lining Part B COSHH   ALLCOAT Swimming Pool Lining Part B COSHH

There are no reviews yet, would you like to submit yours?

Be the first to review “Swimming Pool Lining”

*



You may also like…