ALLCOAT Epoxy Coat Matt Rapid

Provides attractive, hard wearing dust-free finishes to concrete, wood and other surfaces

Epoxy Coat Matt Rapid

Epoxy Coat Seal Heavy Duty

5kg – £117.44

ALLCOAT Epoxy Coat Matt Rapid is a high grade, 2 pack, hard wearing matt epoxy floor coating. It is light, fast and flexible and ideal where a seamless finish is required. ALLCOAT Epoxy Coat Matt Rapid has good resistance to impact abrasion and trafficking. The system is resistant to high temperatures up to 150°C. Slight discolouration may occur at extreme temperatures.

Features & Benefits

  • Excellent chemical resistance
  • Rapid set properties – touch dry in just 2 hours, fully cured in 16 hours
  • Good abrasion and impact resistance
  • Easy cleaning, including removal of graffiti
  • Light and fast installation – usually just one coat required
  • Resistant to thermal shock & hot water
  • Hygienic – does not support fungus or bacterial growth
  • Attractive range of colours available

Typical Uses

  • Dairies
  • Breweries
  • Bakeries
  • Industrial units
  • Warehouses
  • Automotive workshops
SKU: Epoxy Floor Paint Sealer First Coat Matt. Category: .


All surfaces to be coated with ALLCOAT Epoxy Coat Matt Rapid should be dry, clean and free from laitance, oil, grease or other contaminants. Ideally concrete surfaces should be vacuum shotblasted or mechanically abraded to both clean and open the surface to provide a good mechanical key. The separate base and hardener components must be thoroughly mixed together before application.


One or two coats of ALLCOAT Epoxy Coat Matt Rapid can be applied with a roller or brush. Slip resistance can be achieved by specifying a three coat system. The first coat of ALLCOAT Epoxy Coat Matt Rapid being followed by one coat of ALLCOAT Epoxy Coat Matt Rapid, lightly scattered with anti-slip aggregates whilst still wet, at a rate of 50/100 gms per sq.m. When dry, a second ALLCOAT Epoxy Coat Matt Rapid coat can be applied.


ALLCOAT Epoxy Coat Matt Rapid coatings can be cleaned with water, or with ALLCOAT Industrial Floor Cleaner or other good quality detergent or just brushed out. ALLCOAT Epoxy Coat Matt Rapid coated floors should not be subject to hot water above 60ºC or steam cleaning.


10kg, 5 kg


Black, Buff, Cream, Deep Red, Light Grey, Mid Blue, Mid Green, Mid Grey, Royal Blue, Safety Yellow, Signal Red, Terracotta, Tile Red, White

Coverage rate

6-8 square metres per kg

Pot life

1 – 1.5 hrs

Recoat time

24 – 48 hours

Full chemical cure

7 days

Shelf life

12 months

There are no reviews yet, would you like to submit yours?

Be the first to review “Epoxy Coat Matt Rapid”


Related Products

You may also like…