ALLCOAT Chemical Resistant Coating Rapid Set

High grade, hard wearing epoxy floor coating designed for maximum chemical resistance and anti slip properties

Chemical Resistant Coating Anti Slip

DSCF1604

5litres – £158.33

ALLCOAT Chemical Resistant Coating Anti Slip is a high grade, 2 pack, hard wearing epoxy anti-slip floor coating designed for maximum chemical resistance which is also light, fast and flexible. It is ideal where a seamless finish is required. ALLCOAT Chemical Resistant Coating Anti Slip has good resistance to impact abrasion and trafficking. The system is resistant to high temperatures up to 150°C.
Slight discolouration may occur at extreme temperatures.

Features & Benefits

  • Maximum chemical resistance
  • Rapid set properties – touch dry in just 2 hours, fully cured in 16 hours
  • Good abrasion and impact resistance
  • Aluminium oxide grit to provide a hard-wearing anti slip finish
  • Easy cleaning, including removal of graffiti
  • Light and fast installation – usually just one coat required
  • Resistant to thermal shock & hot water
  • Hygienic – does not support fungus or bacterial growth
  • Attractive range of colours available

Typical Uses

  • Food preparation and manufacturing areas
  • Laboratories
  • Chemical plants
  • Aircraft hangers
  • Vehicle maintenance bays
  • Abattoirs
  • Breweries
  • Mortuaries
  • Bakeries
  • Toilets
  • Any areas where a long lasting, easily cleaned, high chemical resistance finish is essential
SKU: Epoxy Floor Paint Sealer First Coat1. Categories: , .

Preparation

All surfaces to be coated with any grade of ALLCOAT Chemical Resistant Coating Anti Slip should be dry, clean and free from laitance, oil, grease or other contaminants. Ideally concrete surfaces should be vacuum shotblasted or mechanically abraded to both clean and open the surface to provide a good mechanical key. The separate base and hardener components must be thoroughly mixed together before application.

Application

One or two coats of ALLCOAT Chemical Resistant Coating Anti Slip can be applied with a roller or brush. Slip resistance can be achieved by specifying a three coat system. The first coat of ALLCOAT Chemical Resistant Coating Rapid Set being followed by an additional coat of ALLCOAT Chemical Resistant Coating Anti Slip, lightly scattered with anti-slip aggregates whilst still wet, at a rate of 50/100 gms per sq.m. When dry a second ALLCOAT Chemical Resistant Coating Anti Slip coat can be applied.

Maintenance

ALLCOAT Chemical Resistant Coating Anti Slip coatings can be cleaned with water, or with ALLCOAT Industrial Floor Cleaner or other good quality detergent or just brushed out. ALLCOAT Chemical Resistant Coating Anti Slip coated floors should not be subject to hot water above 60ºC or steam cleaning.

Hygiene

ALLCOAT Chemical Resistant Coating Anti Slip products are formulated from materials which are designed to achieve the highest levels of performance as safely as possible. However specific components require proper handling and suitable equipment. This information is given in the relevant safety data sheets. In all cases spillage’s or skin contamination should be cleared as soon as possible by dry wiping the affected area and then thoroughly washing with soap and water.

Chemical resistance

ALLCOAT Chemical Resistant Coating Anti Slip has excellent resistance to fuels, oils, lubricants, solvents, alkalis, salts and some acids.

Chemical spillages should always be wiped up as quickly as possible and not allowed to evaporate. For further information, please consult our technical department.

Notes

In order to achieve the best results from this product, it is recommended that the product be used only when temperatures in excess of 10ºC are present with good ventilation.

Variations in temperature and humidity during the cure period can significantly affect the rate of drying and surface finish.

Size

5 litres

Colour

Blue, Dark Grey, Mid Green, Mid Grey, Tile Red

Solids content

Approx. 63%

Coverage

5m² per L per coat

Dry film thickness

125 microns at a coverage rate of 5m² per L

Pot life

40 minutes at 20°C

Touch dry time

2 hours at 20°C

Full Cured Time

16 hours at 20°C

Full chemical resistance

16 hours at 20°C

Shelf life

2 years at ambient temperature

There are no reviews yet, would you like to submit yours?

Be the first to review “Chemical Resistant Coating Anti Slip”

*



Related Products

You may also like…