ALLCOAT Anti Slip Standard

ALLCOAT Anti Slip Standard products are coloured, two-pack, easy to apply resin systems with excellent adhesion to concrete, wood and other surfaces providing attractive, hard wearing dust-free finishes

Anti Slip Standard

Anti Slip Heavy Duty

5 litres – £115.04

ALLCOAT Anti Slip Standard products are coloured, two-pack, easy to apply resin systems with excellent adhesion to concrete, wood and other surfaces providing attractive, hard wearing dust-free finishes. Floors become easier to clean with an impervious finish and are substantially more resistant to damage by fork-lift trucks, chemicals, fuels and lubricants etc.

ALLCOAT Anti Slip Standard can act as a curing membrane to increase hardness of concrete by allowing full hydration of cement. ALLCOAT Anti Slip Standard can be applied to new (green) concrete, 7 days after being poured.

Typical Uses

ALLCOAT Anti Slip Standard, being low-odour, is ideal for use in:

  • The food industry
  • Dairies
  • Breweries
  • Bakeries

The hardwearing properties and resistance to chemical and oil spillages make ALLCOAT Anti Slip Standard ideal for:

  • Industrial units
  • Warehouses
  • Automotive workshops
  • General industrial usage

Features & Benefits

  • Solvent free & low odour
  • Overnight cure
  • Can be applied onto green concrete 
  • Bacteria – free finish
  • Metal surfaces can be treated in conjunction with metal primer 
  • Anti-slip finishes can be created with aggregate added 
  • Resistance to fuels and lubricants
  • Available in a range of colours


SKU: Quick Air Drying Heavy Duty Floor Paint. Category: .


All surfaces to be coated with any grade of ALLCOAT Anti Slip Standard should be dry, clean and free from laitance, oil, grease or other contaminants. Ideally concrete surfaces should be vacuum shot-blasted or mechanically abraded to both clean and open the surface to provide a good mechanical key. The separate base and hardener components must be thoroughly mixed together before application.

Pour the contents of the CURING AGENT tin into the BASE container and thoroughly mix, preferably by mechanical means until a uniform colour is achieved.


One or two coats of ALLCOAT Anti Slip Standard can be applied with a roller or brush. When dry a second ALLCOAT Anti Slip Standard coat can be applied.


ALLCOAT Anti Slip Standard coatings can be cleaned with water, or with ALLCOAT Industrial Floor Cleaner or other good quality detergent or just brushed out. ALLCOAT Anti Slip Standard coated floors should not be subject to hot water above 60°C or steam cleaning.


ALLCOAT Anti Slip Standard products are formulated from materials, which are designed to achieve the highest levels of performance as safely as possible. However specific components require proper handling and suitable equipment. This information is given in the relevant safety data sheets. In all cases spillage’s or skin contamination should be cleared as soon as possible by dry wiping the affected area and then thoroughly washing with soap and water.

Chemical resistance

ALLCOAT Anti Slip Standard has excellent resistance to fuels, oils and lubricants. All grades possess good resistance to dilute acids, alkalis, detergents, salt and sugar solutions.

Chemical spillages should always be wiped up as quickly as possible and not allowed to evaporate. For further information, please consult our technical department.


In order to achieve the best results from this product, it is recommended that the product be used only when temperatures in excess of 10°C are present with good ventilation.

Variations in temperature and humidity during the cure period can significantly affect the rate of drying and surface finish.



20 litres, 5 litres


Black, Blue, Green, Grey, Red, White, Yellow

Coverage Rate

5m² – 10m² per kg

Full Chemical Cure

Touch Dry in 3-4 Hours, Fully Cured in 8 Hours

Shelf Life

12 Months

There are no reviews yet, would you like to submit yours?

Be the first to review “Anti Slip Standard”


Related Products

You may also like…