5 litres – £127.91
ALLCOAT Anti Slip Rapid Set are coloured, two-pack, easy to apply epoxy resin systems with excellent adhesion to concrete, wood and other surfaces providing attractive, hard wearing dust-free finishes. Floors become easier to clean with an impervious finish and are substantially more resistant to damage by fork-lift trucks, chemicals, fuels and lubricants etc.
ALLCOAT Anti Slip Rapid Set can act as a curing membrane to increase hardness of concrete by allowing full hydration of cement. ALLCOAT Anti Slip Rapid Set can be applied to new (green) concrete, 7 days after being poured.
ALLCOAT Anti Slip Rapid Set, being low-odour, is ideal for use in:
- The food industry
The hardwearing properties and resistance to chemical and oil spillages make ALLCOAT Anti Slip Rapid Set ideal for:
- Industrial units
- Automotive workshops
- General industrial usage
Features & Benefits
- Solvent free & low odour
- Overnight cure
- Can be applied onto green concrete
- Bacteria – free finish
- Metal surfaces can be treated in conjunction with metal primer
- Anti-slip finishes can be created with aggregate added
- Resistance to fuels and lubricants
- Available in a range of colours
All surfaces to be coated with any grade of ALLCOAT Anti Slip Rapid Set should be dry, clean and free from laitance, oil, grease or other contaminants. Ideally concrete surfaces should be vacuum shotblasted or mechanically abraded to both clean and open the surface to provide a good mechanical key. The separate base and hardener components must be thoroughly mixed together before application.
One or two coats of ALLCOAT Anti Slip Rapid Set can be applied with a roller or brush. Slip resistance can be achieved by specifying a three coat system. The first coat of ALLCOAT Anti Slip Rapid Set being followed by one coat of ALLCOAT Anti Slip Rapid Set, lighlty scattered with anti-slip aggregates whilst still wet, at a rate of 50/100 gms per sq.m. When dry a second ALLCOAT Anti Slip Rapid Set coat can be applied.
ALLCOAT Anti Slip Rapid Set coatings can be cleaned with water, or with ALLCOAT Industrial Floor Cleaner or other good quality detergent or just brushed out. ALLCOAT Anti Slip Rapid Set coated floors should not be subject to hot water above 60ºC or steam cleaning.
ALLCOAT Anti Slip Rapid Set products are formulated from materials which are designed to achieve the highest levels of performance as safely as possible. However specific components require proper handling and suitable equipment. This information is given in the relevant safety data sheets. In all cases spillage’s or skin contamination should be cleared as soon as possible by dry wiping the affected area and then thoroughly washing with soap and water.
ALLCOAT Anti Slip Rapid Set has excellent resistance to fuels, oils and lubricants. All grades possess good resistance to dilute acids, alkalis, detergents, salt and sugar solutions.
Chemical spillages should always be wiped up as quickly as possible and not allowed to evaporate. For further information, please consult our technical department.
In order to achieve the best results from this product, it is recommended that the product be used only when temperatures in excess of 10ºC are present with good ventilation.
Variations in temperature and humidity during the cure period can significantly affect the rate of drying and surface finish.
20 litres, 5 litres
Dark Blue, Dark Grey, Green, Light Grey, Mid Blue, Orange, Signal Red, Tile Red, Yellow
5m² per litre
|Full Chemical Cure||
Touch Dry in 2 Hours, Fully Cured in 16 Hours