ALLCOAT Advanced Graffiti Protection

Provides a clear, durable seal coating to walls

Advanced Graffiti Protection

antigraffiti

5litres – £88.64

ALLCOAT Advanced Graffiti Protection is a water white clear two pack gloss coating, designed for application onto a variety of finishes as a light stable sealing coat to reduce surface absorbency and ensure ease of cleaning in hygienic locations.

ALLCOAT Advanced Graffiti Protection is also designed for application onto walls as a clear, durable seal coating.

A clear solvent based coating for sealing porous surfaces and providing a more cleanable protective coating.

Features & Benefits

  • Graffiti resistant
  • Impact and abrasive resistant clear surface sealer
  • Available in gloss, silk and matt grades
  • Resistant to hot water
  • Good chemical resistance

Typical Uses

Over ALLCOAT Anti Graffiti Base Colour Coat:

  • As a hard wear, clear seal for both polyurethane and epoxy resin coatings.
  • As a wall finish onto prepared existing coatings and as a sealer for substrates such as plaster and concrete.

ALLCOAT Advanced Graffiti Protection is suitable for application onto a wide range of surfaces, including existing polyurethane and epoxy resin finishes, subject to proper preparation.

ALLCOAT Advanced Graffiti Protection Matt is a gloss, silk and matt grade protection.

Where to use 

Over ALLCOAT Anti Graffiti Base Colour Coat

a) As a hard wearing, clear seal for both polyurethane and epoxy resin coatings.

b) As a wall finish onto prepared existing coatings and as a sealer for substrates such as plaster and concrete.

 

SKU: Anti Graffiti Clear. Category: .

Preparation

 

Surfaces to be coated must be clean, dry and free of loose contaminants.

Air temperature 5-30ºc, humidity 70% RH maximum. Ensure good drying conditions prevail throughout the application and cure of the product.

Pre-stir the base to ensure that any separation is redispersed. The entire contents of the hardener must be added to the base and mixed thoroughly, preferably with a low speed drill and mixing paddle for a minimum of two minutes. Avoid entraining air into the product. Apply by brush or roller.

Surfaces should be recoated 6-8 hours after application to ensure good intercoat adhesion. If more than 48 hours has elapsed mechanical preparation is required.

Colour

Clear

Size

5 litres

Related Products

You may also like…